Advertisement
[]
Installing
Side Shelf, Side Burner and Tool
Holder Kit
1.
Remove Side Burner from Side Burner Kit
before installing.
Enlisting the aid of an assistant, attach Side Burner
Frame to right side of grill. Attach Side Shelf to
left side of grill as shown in Figure
8a.
Align
the 4 holes on Side Shelf and Side Burner Frame
with the threaded holes on left and right Bowl
Support Brackets. Tighten securely using 4 of the
1/4"x3/4" Pattern Head Screws provided.
2.
install the Side Burner Gas Valve Assembly
to
the Side Bumer Frame. See Figure 8b. Attach
the Side Burner Gas Valve Assembly to the Side
Burner Gas Valve Hole on the Side Burner Frame,
as shown in Figure 8b.
Align the 2 holes on
the Side Burner Frame with the threaded holes
on the Side Burner Gas Valve Bracket. Tighten
securely
using
2 of
M4x8mm
Pattern
Head
Screws and 2 Washers.
.
Cut Fastening Band from Side Burner Pot Support
and set Pot Support aside. Install the Side Burner
through the top hole in Side Burner Frame and
onto the Side Burner Gas Valve. Make sure that
opening at end of Side Burner Tube goes over
tip of Side Burner Gas Valve. Secure Side Burner
with supplied
Cotter Pin. See Figure
8c or
Figure
8d. Place Pot Support into position on
Side Burner Frame.
4.
install the Control Knob to the Side Burner Gas
Valve Stem. See Figure
8c or Figure
8d.
5.
For LP Gas grills:
Connect
the Electric Wire
terminal from Side
Burner with the other from Grill Head. Unscrew 1/
4" x 2" Pattern Head Screw from Right Cart Leg
and fix Wire Plug "A" into Wire Fastener. install
Wire Fastener to Right Cart Leg. Tighten securely
using the same screw. See Figure
8c.
Figure 8a
SIDE SHELF
GRILL HEAD
S_DE BURNER
FRAME
J
z
BOWL SUPPORT
BRACKET-RIGHT
Figure 8b
HOLES FOR SIDE BURNER GAS VALVE
M4x8mm
PATTERN
HEAD
SCREW AND
WASHER
SIDE BURNER
FRAME
JSIDE
BURNER
GAS
VALVEASSEMBLY
_SIDE
BURNER
GAS
VALVE
BRACKET
Figure 8c (LP gas model only)
SIDE BURNER
_/
POTSUPPORT
SiDE
BURNER
CONNECTION
TUBE
FROM_
GRILL HEAD
CONTROLKNOB
RIGHT CART
COTTERPIN
\
SIDE BURNER FRAME
J ELECTRIC
WIRE
FROM GRILL HEAD
WIRE
FROM
SIDE BURNER
_StDE
BURNER
GAS
VALVE ASSEMBLY
_FUEL
GAUGE
WiRE
PLUG"A"
17
WIRE FASTENER
Advertisement
