4-2 Deck
4-2-1 How to Load and Unload (Setting the Mechanical Modes)
1) Set the power-supply output to approximately 3V~5V, and connect it to the Motor Loading.
2) Choose the polarity depending on whether loading or unloading. (See Table 4-1)
3) Supply the voltage to the Motor Loading.
DC POWER SUPPLY
Samsung Electronics
<Table 4-1>
A
+
_
Fig. 4-9 Loading and Unloading
B
Movement of Chassis
_
+
Disassembly and Reassembly
Loading
Unloading
A
B
4-5