Lcd Adjustment - Samsung VP-D451 Service Manual

3-3 LCD Adjustment

3-3-1 Adjustment Preparation
1) Before you start
ΠUse the buttons on the CAMCORDER when adjusting LCD.
´ When changing the adjustment item, please press the "EASY-Q" and "DISPLAY" buttons on the
CAMCORDER.
ˇ The adjustment value can be changed by moving the "MENU Selector" Left or Right.
¨ Press the "MENU Selector" to store each adjustment into EEPROM.
ˆ The OSD shows "OK" after finishing each adjustment step.
Ø In order to exit the adjustment mode, disconnect the power source.
2) Function of each buttons on the Set Key
Buttons
MENU Selector push (Confirm)
MENU Selector Right (Data Up)
MENU Selector Left (Data Down)
EASY-Q (Mode Up)
DISPLAY (Mode Down)
3) How to get into the LCD adjust mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "PLAYER" position and Mode Switch to "TAPE" position.
Samsung Electronics
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
EASY Q Button
STOP Button
Mode switch
DISPLAY Button
PB ZOOM
<Table 3-4>
Description
Start/Stop Button
Power switch
Fig. 3-8
Alignment and Adjustments
MENU Button
MENU Selector
3-7