Samsung VP-D451 Service Manual page 41

4-2-7 Drum, Holder FPC
4-2-7(a) Disassembly
Note1 : Do not touch the Head tip ´ when removing
or reassembling the Drum Œ.
Note2 : Do not touch the Roller S ∏, T " when
removing or reassembling the Drum Œ.
1) Remove 1 Screw Πand then remove the Spring
Plate Drum ´.
2) Lift up the Drum ˇ.
3) Remove 1 Screw ¨ and then lift up the Holder FPC
ˆ.
BASE DRUM ∏
Samsung Electronics
DRUM ˇ
Fig. 4-15 Drum, Holder FPC
4-2-7(b) Reassembly
1) Mount and insert the Drum ˇ to the Bosses Ø.
2) Insert the Spring Plate Drum ´, and secure the 1
Screw Œ.
3) Insert the Holder FPC ˆ, and secure the 1 Screw ¨.
HEAD TIP
Ø 2 BOSSES
´ SPRING PLATE
Π1 SCREW
Disassembly and Reassembly
¨ 1 SCREW
ˆ HOLDER FPC
4-11