Accepting A Call - Gigaset N300IP User Manual

Making calls

Accepting a call

An incoming call is indicated on a Gigaset handset in three ways: by ringing, by a
display on the screen and by the flashing speaker key d.
Please note
Only calls to the receive connections assigned to the handset are signalled
¢
( page
The following applies in particular if VoIP connections are configured on your
base:
u
If you have not assigned the receive connections on your phone, all incom-
ing calls are signalled on all registered handsets.
u
If you have assigned connections but not assigned a connection to any
handset as the receive connection, calls on this connection will not be sig-
nalled.
u
If a call cannot be assigned to any connection on the phone, this call is sig-
nalled on all handsets.
You can accept the call on the handset by:
¤
Pressing the talk key c.
¤
Pressing the speaker key d.
To deactivate the ringtone, press the
long as it is displayed on the screen.
If you press the end call key a, a call to a VoIP connection is rejected. For a call
to the fixed line connection, only the ringtone is deactivated as with
40
112).
§Silence§
display key. You can accept the call as
§Silence§
.