Setting Up The Phone - Installation Wizard - Gigaset N300IP User Manual

First steps
Setting up the phone – installation wizard
The procedure below requires that your phone is automatically assigned an IP
address by the router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router), you will have
to assign a static IP address to the base for LAN access. You must enter this IP
address on the handset before carrying out the following steps
In order to be able to make calls with your telephone over the Internet, you must
configure at least one VoIP connection on your telephone. You can configure VoIP
connections using the following methods:
u
Using a web-browser on your PC to access the telephone web configurator.
Instructions for configuring the first VoIP connection using the web configurator
can be found in the quick guide that comes with the device.
u
Using your telephone's installation assistance on a connected Gigaset handset.
This method is described below using the Gigaset C59H handset as an example.
Configuration is the same for Gigaset C610H, SL78H, SL400H, S79H or S810H.
Auto configuration:
The configuration process for VoIP connections is automated for some VoIP pro-
viders. The provider creates a configuration file with all required VoIP access data
(the general VoIP provider data and your personal account data). This file is placed
on a configuration server on the Internet for downloading to your phone.
Your provider gives you a configuration code.
The installation wizard on your phone
code at the relevant point. All the required VoIP data is then downloaded auto-
matically onto your phone.
The configuration file is only transferred via a secure connection (TLS authentica-
tion). If the TLS authentication fails, the message key f flashes. Press the mes-
sage key to display the Certificate error - Please check your certificates in the
Web configurator. message. Press the right display key to confirm the message.
Log in to the Web configurator
The Security
not be established and what you can do.
If the configuration file fails to download (e.g., because the configuration server is
not available), the phone keeps trying to establish a connection until the file is
downloaded successfully to the phone.
If no VoIP connections have been generated on the phone yet, you can start the
installation wizard directly on the handset. The wizard allows you to make all nec-
essary settings for your phone.
Two individual wizards are combined to form the installation wizard.
1 IP wizard
2 Connection wizard
16
¢
(
¢
( page 134) Web page tells you why the secure connection could
¢
( page 17) prompts you to enter the
page 123).
¢
( page 107).