Gigaset N300IP User Manual page 22

Entering the auto configuration code
IP Wizard
Activation code for
autoconfiguration:
< C
All data required for VoIP telephony is loaded directly from the Internet to your
phone.
When all the data has been successfully loaded onto your phone, Your IP account
is registered with your provider. appears on the display.
¤
For further information, please see
Downloading VoIP provider data
The connection wizard establishes a connection with the Gigaset configuration
server on the Internet. Various profiles with general access data for different VoIP
providers can be downloaded here.
After a brief period you will see the following display:
Select your country
Country 1
Country 2
Country 3
Country 4
Country 5 V
Back
¤
Using the keypad, enter the auto
configuration code you received
from the provider (max. 32 charac-
ters).
OK
¤
Press the key below
display screen.
"2. Connection
A list of countries is loaded.
¤
Press up or down on the control key
q repeatedly until the country in
which you want to use the phone is
selected in the display.
OK
¤
Press the key below
display screen to confirm your selec-
tion.
First steps
§OK§
on the
wizard", page 25.
§OK§
on the
21