Connecting Hoses - Quooker PRO3-VAQ E Installation Manual

B
Fitting Fusion tap
2
1
3
2
4
1 Tap through
work top
Push the tap through the hole in the
work top.
2 Securing tap
Position the brass fixing plate around
the hoses. Screw the fixing nut onto
the tap thread. Adjust the position of
the tap to ensure that the Quooker
logo is facing the user. When the
handle is in the cold position, it will
be parallel to the edge of the work
top. Tighten the fixing nut with a pipe
wrench, socket wrench or spanner.
3 Fitting to thin
work top
When fitting to a thin work top, use
the white tap support underneath the
brass fixing plate.
4 Connecting
hoses
Insert the inlet hose screens and
connect the hot and cold water inlet
hoses to the mains.