Download Print this page

Quooker PRO3 Instruction Manual

Hide thumbs Also See for PRO3:

Additional instruction guide PRO3

Please note:

Your installation may look different from the one shown in this guide. This instruction replaces

the "Contents of the pack" page and part C of the Installation guide if you have copper pipes.

Contents of the pack

1. PRO3 tank

2. Inlet reducing valve with fibre washer

3. Isolation valve with filter and fibre washer

4. Inlet couplings and fibre washers

Table of Contents

Do you have a question about the PRO3 and is the answer not in the manual?

Page 1 Additional instruction guide PRO3 Please note: Your installation may look different from the one shown in this guide. This instruction replaces the “Contents of the pack” page and part C of the Installation guide if you have copper pipes. Contents of the pack 1.
Page 2 Connecting water • The Quooker operates under mains water pressure and must always be fitted to the water pipe with the supplied inlet valve. • The Nordic single tap, the Fusion tap or the Flex tap must be installed according to the locally applicable regulations.