Grandstream Networks GXP1450 User Manual page 67

Send SIP Log
Auto Recover From
Abnormal
Maintenance -> Language
Display Language
Language File Postfix
Maintenance -> TR-069
Enable TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password
Connection Request Port
CPE SSL Certificate
CPE SSL Private Key
Maintenance -> Security
Configuration via Keypad
Menu
FIRMWARE VERSION 1.0.5.58
Syslog messages are sent based on the following events:

product model/version on boot up (INFO level);

NAT related info (INFO level);

sent or received SIP message (DEBUG level);

SIP message summary (INFO level);

inbound and outbound calls (INFO level);

registration status change (INFO level);

negotiated codec (INFO level);

ethernet link up (INFO level);

SLIC chip exception (WARNING and ERROR levels);

memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or not.
The default setting is "No".
Configures whether auto recover or not when the phone is running abnormal.
The default setting is "Yes".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
Enables TR-069. The default setting is "No".
URL for TR-069 Auto Configuration Servers (ACS).
ACS username for TR-069.
ACS password for TR-069.
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
The user name for the ACS to connect to the phone.
The password for the ACS to connect to the phone.
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configures the access control for the users to configure from keypad Menu.
There are three different options:
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 67 of 80