Grandstream Networks GXP1450 User Manual page 61

XML Application Soft key
Label
Settings -> Programmable Keys
Line Key X
FIRMWARE VERSION 1.0.5.58
field could be IP address or URL, with up to 256 characters.
Note:
This option is not applicable to GXP14xx.
Specifies the soft key name displayed on the idle screen for the users to
enter XML application. Please make sure the label name does not
exceed the soft key range on each model. The default value is "XML
Service".
Note:
This option is not applicable to GXP14xx.
Assigns a function to the corresponding line key. The key mode options
are:

Line
Regular line key to open up a line and switch line. The Value field
can be left blank.

Shared Line
Share line for Shared Line Appearance feature. Select the Account
registered as Shared line for the line key. The Value field can be left
blank.

Speed Dial
Select the Account to dial from. And enter the Speed Dial number in
the Value field to be dialed.

Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension
number in the Value field to be monitored.

Presence Watcher
This option has to be supported by a presence server and it is tied to
the "Do Not Disturb" status of the phone's extension.

Eventlist BLF
This option is similar to the BLF option but in this case the PBX
collects the information from the phones and sends it out in one
single notify message. PBX server has to support this feature.

Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active
account. For example, if the phone is offhook and account 2 is active,
it will call the configured Speed Dial number using account 2.

Dial DTMF
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 61 of 80