Grandstream Networks GXP1450 User Manual page 64

Sip enterprise phones
Hide thumbs Also See for GXP1450:
Table of Contents

Advertisement

DHCP Host name
(Option 12)
DHCP Vendor Class ID
(Option 60)
PPPoE Account ID
PPPoE Password
PPPoE Service Name
IPv4 Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Preferred DNS Server
IPv6 Address Type
Static IPv6 Address
IPv6 Prefix Length
IPv6 Prefix
DNS Server 1
DNS Server 2
Preferred DNS server
Network -> Advanced Settings
802.1X mode
802.1X Identity
MD5 Password
802.1X CA Certificate
FIRMWARE VERSION 1.0.5.58
obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used for IPv4.
Enter the Default Gateway when static IP is used for IPv4.
Enter the DNS Server 1 when static IP is used for IPv4.
Enter the DNS Server 2 when static IP is used for IPv4.
Enter the Preferred DNS Server for IPv4.
Allows users to configure the appropriate network settings on the phone to
obtain IPv6 address. Users could select "Auto-configured" or "Statically
configured" for the IPv6 address type.
Enter the static IPv6 address when Full Static is used in "Statically configured"
IPv6 address type.
Enter the IPv6 prefix length when Full Static is used in "Statically configured"
IPv6 address type.
Enter the IPv6 Prefix (64 bits) when Prefix Static is used in "Statically
configured" IPv6 address type.
Enter the DNS Server 1 for IPv6.
Enter the DNS Server 2 for IPv6.
Enter the Preferred DNS Server for IPv6.
Allows the user to enable/disable 802.1X mode on the phone. The default
value is disabled. To enable 802.1X mode, this field should be set to
EAP-MD5.
Enter the Identity for the 802.1X mode.
Enter the MD5 Password for the 802.1X mode.
Upload 802.1X CA certificate to the phone; or delete existed 802.1X CA
certificate from the phone.
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL
Page 64 of 80

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents