Grandstream Networks GXP1450 User Manual page 66

HTTP/HTTPS Password
Upgrade Via
Firmware Server Path
Config Server Path
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Allow DHCP Option 43
and Option 66 Override
Server
Allow DHCP Option 120
to override SIP Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Authenticate Conf File
Maintenance -> Syslog
Syslog Server
Syslog Level
FIRMWARE VERSION 1.0.5.58
The password for the HTTP/HTTPS server.
Allows users to choose the firmware upgrade method: TFTP, HTTP or HTTPS.
Defines the server path for the firmware server. It could be different from the
configuration server for provisioning.
Defines the server path for provisioning. It could be different from the firmware
server for upgrading.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching prefix will be downloaded.
This field enables user to store different versions of firmware files in one single
directory on the firmware server. If configured, only the firmware file with the
matching postfix will be downloaded.
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching prefix will be downloaded.
This field enables user to store different configuration files in one single
directory on the configuration server. If configured, only the configuration file
with the matching postfix will be downloaded.
Default setting is "Yes". DHCP option 66 originally was only designed for TFTP
server. Later on it was extended to support an HTTP URL. GXP phones
support both TFTP and HTTP server via option 66. Users can also use DHCP
option 43 vendor specific option to do this. DHCP option 43 approach has
priorities.
Enables DHCP Option 120 from local server to override the SIP Server on the
phone. The default setting is "No".
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Authenticates configuration file before acceptance. The default setting is "No".
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING AND ERROR.
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 66 of 80