Grandstream Networks GXP1450 User Manual page 59

LCD Contrast
Disable Missed Call Backlight
Settings -> Date and Time
NTP Server
Allow DHCP Option 42
Override NTP Server
Time Zone
Self-Defined Time Zone
Date Display Format
FIRMWARE VERSION 1.0.5.58
This options is not applicable to GXP140x.
Configures the LCD contrast level (from 0 to 20). The default value is 10.
When it's set to "Yes", the LCD backlight will not be turned on when there
is a new missed call. The default setting is "No".
Note:
This option is not applicable to GXP140x.
Defines the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.
Defines whether DHCP Option 42 should override NTP server or not.
When enabled, DHCP Option 42 will override the NTP server if it's set up
on the LAN. The default setting is "Yes".
Configures the date/time used on the phone according to the specified
time zone.
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead which is
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Greenwich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
Tuesday...)
rd
3
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Configures the date display format on the LCD. The following formats are
supported:

yyyy-mm-dd: 2012-07-02

mm-dd-yyyy: 07-02-2012

dd-mm-yyyy: 02-07-2012

dddd, MMMM dd: Friday, October 12
GXP2120/GXP2110/GXP2100/GXP14xx USER MANUAL Page 59 of 80