Table of Contents
Advertisement
Configuring Static DHCP Entries
Click the Static tab to add static DHCP entries to the SonicWALL. Static entries are IP addresses
assigned to servers requiring permanent IP settings.
Note:
Static DHCP entries should not be configured for computers with IP addresses configured in Network
To configure static entries, follow these steps:
1. In the Static page of the DHCP Server Configuration window, click Add. The Static Entry
Configuration window is displayed.
General
2. In the General page, make sure the Enable this DHCP Range is checked, if you want to enable this
range.
3. Select the interface from the Interface menu. The IP addresses are in the same private subnet as the
selected interface.
4. Type the device IP address in the Static IP Address field.
5. Type the device Ethernet (MAC) address in the Ethernet Address field.
6. Type the number of minutes an IP address is used before it is issued another IP address in the Lease
Time (minutes) field. 60 minutes is the default value.
7. Select the gateway from the Gateway Preferences menu. The LAN IP address is the default value,
but you can select Other and type a different IP address for the gateway.
Page 80 SonicWALL SonicOS Standard Administrator's Guide
Advertisement
Table of Contents
