Table of Contents
Advertisement
Configuring the Central Gateway for DHCP Over VPN
To configure DHCP over VPN for the Central Gateway, use the following steps:
1. Log into the Management interface, click DHCP, and then DHCP over VPN.
2. Select Central Gateway from the DHCP Relay Mode menu.
3. Click Configure. The DHCP over VPN Configuration window is displayed.
4. Select Use Internal DHCP Server to enable the Global VPN Client or a remote firewall or both to use
an internal DHCP server to obtain IP addressing information.
5. If you want to send DHCP requests to specific servers, select Send DHCP requests to the server
addresses listed below.
6. Click Add. The IP Address window is displayed.
7. Type the IP addresses of DHCP servers in the IP Address field, and click OK. The SonicWALL now
directs DHCP requests to the specified servers.
8. Type the IP address of a relay server in the Relay IP Address (Optional) field.
VPN Page 119
Advertisement
Table of Contents
