Step 6: Dhcp Server; Step 7: Sonicwall Configuration Summary - SonicWALL SonicOS Enhanced 2.2 Administrator's Manual

Step 6: DHCP Server

8. The Optional-SonicWALL DHCP Server window configures the SonicWALL DHCP Server. If
enabled, the SonicWALL automatically assigns IP settings to computers on the LAN. To enable the
DHCP server, select Enable DHCP Server, and specify the range of IP addresses that are assigned
to computers on the LAN.
If Disable DHCP Server is selected, you must configure each computer on your network with a static
IP address on your LAN. Click Next.

Step 7: SonicWALL Configuration Summary

9. The Configuration Summary window displays the configuration defined using the Installation
Wizard. To modify any of the settings, click Back to return to the WAN Settings window. If the
configuration is correct, click Next to proceed to the Congratulations window.
Initial Configuration Using the Wizards Page 21