Grounding work
• Grounding must be done by a qualified installer for your safety.
Grounding the power cable
• The standard of grounding may vary according to the rated voltage and installation place of
the air conditioner.
• Ground the power cable according to the following.
Power
condition
potential of lower than 150V
potential of higher than
Note 1) Grounding work 3
Note 2) Grounding at dry place
Performing the grounding work
• Use the grounding wire by referring to the specification of the electric cable for the outdoor
unit.
DVM PLUS3 HR_IM_E_32805-2.indd 35
Installation
place
High humidity
Electrical
Electrical
150V
Grounding must be done by your installation specialist.
Check if the grounding resistance is lower than 100Ω.
When installing a circuit breaker that can cut the electric circuit in case of a short
circuit, the allowable grounding resistance can be 30~500Ω.
The grounding resistance is should be lower than 100Ω.
(It should not be higher than 250Ω)
When using the terminal for grounding
only
Grounding terminal
Average humidity
Perform the grounding
Perform the
work 2 if possible for your
Note 1)
grounding work 3.
safety.
Must perform the grounding work 3.
(In case of installing circuit breaker)
When using grounding of the switch
board
installing the unit _35
Low humidity
Note 2)
Note 1)
Switch board
2011-11-11 오후 4:18:29