Preparing The Installation; Shape Of The Outdoor Unit; Accessories; Optional Accessories - Samsung DVM PLUS III HR Installation Manual

preparing the installation

SHAPE OF THE OUTDOOR UNIT

Shape
Heat Pump

ACCESSORIES

• Keep supplied accessories until the installation is finished.
• Hand the installation manual over to the customer after finishing installation.
• The quantities are indicated in parentheses.
Installation manual (1)
-

Optional accessories

• The following accessories are needed when installing the outdoor and indoor unit.
Y-joint
Y-joint
(Only for DVM PLUS III HR module)
Header joint
Outdoor joint
Outdoor joint
(Only for DVM PLUS III HR module)
• When the indoor units without EEV such as wall mounted and ceiling type are installed, it is
necessary to install distribution kits.
• It is necessary to install MCU when HR units are installed.
• Distribution kits and MCU should be purchased from the factory.
06_ preparing the installation
DVM PLUS3 HR_IM_E_32805-2.indd 6
RD075/100VRX
Drain plug (2)
-
Type
MXJ-YA1509
MXJ-YA2512
MXJ-YA2812
MXJ-YA2815
MXJ-YA3119
MXJ-YA3819
MXJ-YA1500
MXJ-YA2500
MXJ-YA3100
MXJ-HA2512
MXJ-HA3115
MXJ-HA3819
MXJ-T3819
MXJ-T3100
RD125VRX
Cable tie (4)
-
Model Capacity of outdoor unit
51MBH and below
51~138MBH
138~160MBH
160~240MBH
240~336MBH
336~438MBH
80MBH and below
80~240MBH
240~468MBH
160MBH and below
160~240MBH
Over 240MBH
12~30Ton
12~30Ton
Cap drain (2)
Remarks
For closing the drain hole
2011-11-11 오후 4:18:09