Rohde & Schwarz PR100 Manual page 181

R&S PR100
[SENSe]
. :FREQuency
. . :CONVersion
. . . :THReshold <numeric_value>|MINimum|MAXimum
Set the conversion threshold. This determines at which frequency the device
switches from normal to direct path reception. During normal reception, the
signal is modulated downward to an intermediate frequency. When the
frequency drops below the conversion threshold, the downward modulation is
skipped, hence the name "direct path" reception.
Parameters:
<numeric_value>
MINimum|MAXimum
Example:
SENSe:FREQuency:CONVersion:THReshold 27 MHz
[SENSe]
. :FREQuency
. . :CONVersion
. . . :THReshold? [MINimum|MAXimum]
Query of conversion threshold.
Parameters:
none
MINimum|MAXimum
Result:
conversion threshold in Hz
Example:
SENSe:FREQuency:CONVersion:THReshold? -> 27000000
value of conversion threshold
setting the lowest|highest conversion threshold
query of current conversion threshold
query of lowest|highest conversion threshold
User Manual