Time Setting; Coarse Adjustment; Fine Adjustment; Setting The Switching Times - Stanley BRANDON DRY OIL Operation Instructions Manual

Table of Contents

Advertisement

TIME SETTING - For DHW Models Only
Mechanical Clock Programmable
Controller

COARSE ADJUSTMENT

Rotate switching dial (section containing numbers 1
- 24) in direction of the arrow until the current time is
almost opposite the arrow marked F (here: 19.45)
Fig.1

FINE ADJUSTMENT

Push the minute hand in the direction of the arrow
until the current time is opposite the arrow marked F
(here: 20.00) Fig.2.

SETTING THE SWITCHING TIMES

To operate the appliance using the automatic
switching set the large slider to position marked
On the outer ring there are 96 small sliders, each
slider represents a time period of fifteen minutes.
The cooker switches "ON" or "OFF" depending on
the position of these sliders. When the slider is
nearest the centre of the clock it is in the "OFF"
mode, and when the slider is moved away from the
centre of the clock it is in the "ON" mode.
Switching example:
ON - Function from 18 - 22 h
OFF - Function from 22 - 18 h
Fig.3
Fig.1

POWER FAILURE

In the event of power failure, the programmer will
need to be reset, but switching times will not be
altered.
If appliance does not operate normally
please refer to Fault Finding.
TIME SETTING FOR DRY MODELS ONLY
DIGITAL CLOCK PROGRAMMABLE
CONTROLLER
TO SET TIME (NOTE: Cooker cannot be operated
until the time is set).
1.
When Power is applied, display flashes
"AUTO" and "000" alternatively.
Fig.2
2.
Press buttons 1 & 2 from left, "0.00" is
displayed steadily . Letters "AUTO" flash.
3.
Press plus or minus button until the actual Time
- Of - Day is displayed.
4.
When releasing the buttons Time - of - Day
starts precisely to the second --.--. the cooking
pot symbol "

INTERVAL TIME

Note: Interval Time does not control the cooker, it
sets off an alarm after the preset period of time.
1.
Press interval time button (first button on
the left) display shows "0.00" and the bell
symbol is displayed.
2.
Press plus button until the desired setting is
displayed.
3.
On releasing the button, run down of interval
time starts after the 4 - seconds time window.
Time - of - Day re-appears in the display with
the cooking pot symbol illuminated steadily.
4.
The interval time having elapsed. The acoustic
signal sounds with two beeps, pause, two
beeps etc....
4
" is illuminated steadily.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brandon dhw oil

Table of Contents