Print Head Alignment Adjustment - SATO CL408e Service Manual

5.7 Print Head Alignment Adjustment

MAJOR ADJUSTMENT
To further optimize print quality, especially when using thick label stock, additional
adjustments are possible. Perform the following steps using head pattern as a guide.
STEP
1.
2.
Fig. 5-8
PN 9001078
Rev. A
Required Equipment:
PROCEDURE
Load the ribbon and label stock into the printer.
Loosen and adjust screw along slot to move indexing pointer for maximum
print quality. .ig. 5-8
SATO CL408e/CL412e Service Manual
Section 5. Mechanical Adjustments
• #2 Pozidrv Screwdriver
INDEXING POINTER
SHIFTS HEAD
BACKWARD/FORWARD
Page 5-9