Label Dispenser Installation
LH COVER
FRONT DOOR
STEP
1.
2.
PN 9001078
Rev. A
FRONT DOOR
RH COVER
PROCEDURE
Switch the printer O.. but keep the power cable plugged in to
discharge any possible static charges.
Raise the RH cover uncovering the mechanical section. Loosen (2)
inside screws holding the LH cover to the frame. Remove (2)
outside screws holding the LH cover to the base and remove the
cover. Swing the front door open. .igs. 9-10 & 9-11
SATO CL408e/CL412e Service Manual
Section 9. Optional Accessories
LH COVER
Fig. 9-10
ACCESS PLATE
(TO BE REMOVED)
RH COVER
Page 9-7