6.
Cleaning and Maintenance
Instructions for storage
89
Transporting the printer
58
(continued)
70
71
Fig. 62
If the printer is to be shipped, the storage instructions described above
are to be carried out completely. Then, additionally make the following
preparations:
• Open the hood (4,
cover.
• Afterward, take out the flash bulb (refer to Chapter 4.7)
• Close the flash cover and the hood.
• Use original packaging and securely screw the printer to the baseplate
(see unpacking instructions).
• Reinsert the transport anchor (27) (see
adhesive tape.
• Make sure that the instrument is only transported upright.
• Likewise, clean the removed removable disk
(70) with the sealing lip with (clean) alcohol
and a cleaning swab (89)
• The sealing lip (71) must be completely free
of ink residue. Check the sealing lip for dam-
age. Do not reuse a replacement plate with a
damaged sealing
• Clean the instrument completely, as described
in
Chap.
6.1.
Fig.
31) of the printer and loosen the screw of the flash
Fig.
Instructions for Use V 1.9 RevD - 05/2013
(Fig.
62).
lip.
12) and secure the hood with