System Troubles - Honeywell Tuxedo Touch Wi-Fi User Manual

System Troubles

The "Security" screen also displays an Icon(s) if a system trouble(s) occurs. If a Trouble Icon is shown,
contact your alarm company. The following Icons may be shown as applicable to your system:
ICON
AC Loss – The system is not receiving AC power.
Bell Failure – The system bell or siren has a problem. Note: This Icon displays when
interfacing with residential panels only.
Expander Failure – The system has a failure in an expansion module.
Low Battery – The system battery, that powers the system during an AC power loss, is
low.
LRR Supervision Failure – The Communication Device used to communicate with the
central station has a supervision failure
Max Attempts Exceeded – The system has exceeded the maximum attempts to
communicate with the Central Station.
Pager Failure – The system cannot communicate with an assigned pager.
Telco-1 Cut – The system is not able to communicate with the central monitoring station
over the primary phone line.
Telco-2 Cut – The system is not able to communicate with the central monitoring station
over the secondary phone line.
Wireless Failure – The system is not able to communicate with its wireless devices.
Note: If multiple faults exist, press the More Choices icon and then the Show Zones icon to view and
scroll through the complete list of faults.
Notes and Compatible Devices (cont'd)
FUNCTION
51