User Codes; Authority Levels - Honeywell Tuxedo Touch Wi-Fi User Manual

User Codes

Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to
various features and functions. Tuxedo can hold the identity for 10 Users in its memory. If additional
Users are needed, define the additional Users using the Console Emulation Mode.
Users for the system are programmed in a central user setup location that provides the specific
questions for authorization levels assigned to different users. You may want these users to be the same,
but there are situations in which you may want a user to have limited capabilities. These capabilities
are defined by the Authority Level assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority
assigned to you, there are certain system functions you may be prohibited from performing. The
following information describes the authority levels that can be assigned through the keypad and
provides the equivalent authority level name found in your alarm system manuals. The authority levels
that can be assigned are as follows:
Authority
Functions
Level
Master
Can perform all security functions,
add/delete users in assigned partition,
program scheduled events, and change
partition master code
Normal Perform security functions (arm,
disarm)
Guest
Can arm the system in assigned
partitions, but cannot disarm the
system unless the system was armed
with this code.
Note: Do not assign this level if Quick
Arm is enabled in your system.
No
Used to restrict access from a partition.
Access
The authorized code for adding users is dependent upon the alarm panel you are interfacing with.
Check your alarm panel Installation and Setup Guide to determine who can add users.
Using the Security System (cont'd)
29
Equivalent System Name
Residential Systems
Partition Master
Standard User
Guest
N/A
Commercial Systems
Level 1 Master
Level 3 Operator A
Level 4 Operator B
N/A