Updating Tuxedo With New Or Removed Devices; Z-Wave Troubleshooting - Honeywell Tuxedo Touch Wi-Fi User Manual

Home automation system
Hide thumbs Also See for Tuxedo Touch Wi-Fi:
Table of Contents

Advertisement

Using Z-Wave Devices and Scenes (cont'd)
3. At Tuxedo #1: Press Add. At Tuxedo #2: Press Add.
When device information from the Primary Tuxedo is downloaded to the Secondary Tuxedo:
the Secondary Tuxedo displays, "Controller Add Success."
the Primary Tuxedo displays, "Device Added Successfully."
Note: If the device status is failed, remove and enroll Tuxedo as the secondary controller again and
then reboot the system.

Updating Tuxedo with New or Removed devices

When devices are added or removed from the Z-Wave network, the device information needs to be
updated in Tuxedo. To update this information, from the Primary Tuxedo, do the following.
1. Press Add Device
Tuxedo controller.
The controller scans for device changes. The message is displayed:
Removing a Secondary Tuxedo
To remove the Secondary Tuxedo, do the following:
1. Press Remove Device
Tuxedo. Both Tuxedos display, "Device Removed" and the Secondary Tuxedo reverts back to the
Primary Tuxedo.

Z-Wave Troubleshooting

PROBLEM
Cannot add new
Make sure the Z-Wave device is within range of the Tuxedo keypad. You may
device.
need to move the device closer to Tuxedo. Refer to the Z-Wave device
Instruction Guide for proper range.
Device is within
proper range
but still is not
included.
Selected device
will not delete.
on the Primary Tuxedo controller; press Add Device
on the Primary Tuxedo; press Remove Device
1. At Tuxedo:
a) Press the Automation icon and then press the Z-Wave Setup
icon to display the "Z-Wave Device Management" screen.
b) If the device does not appear on the screen, press the Remove
Device icon.
2. At the Z-Wave device:
a) Press the Function Key. The screen displays the message
"Device Removed."
3. At Tuxedo:
a) Include device again.
When deleting a device, if the selected device remains on the screen,
highlight the device name and press the Removed Failed icon.
24
"Devices added successfully"
SOLUTION
on the Secondary
on the Secondary

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents