Download  Print this page

Mitsubishi Electric PLA-RP-BA Technical Data Manual Page 93

Mitsubishi electric split-type, heat pump air conditioners.
Hide thumbs

Advertisement

9-2. PLA-RP·BA(2)
9-2-1 FRESH AIR INTAKE AND BRANCH DUCT
1. Branch duct hole and fresh air intake hole (Fig. 1)
At the time of i nstallation, use the duct holes ( cut out) located at the positions shown in Fig.1, as and when required.
• A fresh air intake hole for the optional multi function casement can also be made.
Note:
The figure marked with * in the drawing represent the dimensions of the main unit excluding those of the optional
multi function casement.
When installing the optional multi function casement, add 135 mm to the dimensions marked on the figure.
When installing the branch ducts, be sure to insulate adequately.
Otherwise condensation and dripping may occur.
Fresh air intake hole
Indoor unit
A
Refrigerant pipe
A
Branch duct hole
A
Drain pipe
90
Branch duct
hole diagram
(view from
either side)
[175 burring hole pitch
Fig. 1
Fresh air intake hole diagram
3-[2.8 burring hole
100
100
90
14-[2.8 burring hole
350
[150 cut out hole
93
Unit:mm
[125 burring hole pitch
120
[100 cut out hole
Ceiling

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: