Product Record; Serial Plate Location; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore ELITE 3231 Use And Care Manual

Product Record
in this space below, record the date of purchase, model and serial
number of your product. You will find the model and serial number
printed on the serial plate. This serial plate is located under the
cooktop. See bottom of this page for the serial plate location.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.
Serial Plate Location
Please see the illustration for exact location. Remember to record
the serial number for future_reference.
Serial plate is "__
located under the J
burner box _-
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas appliance is designed to aflow for instructions which must be read before and followed
conversion to Liquefied Petroleum (L.P.) Gas. carefully when installing the kit.
Only a qualified service agent should perform the L. P.
conversion. Contact the local gas provider for conversion.
The L. P.Conversion Kit is supplied with this unit and is
located in the literature package. The kit contains installation
To avoid serious injury, any additions,
changes or conversions required in order for this appliance to
satisfactorily meet the application needs must be made by a
qualified service agent.
Grounding instructions
For personal safety, the cooktop must be properly grounded. For maximum
safety, the power cord must be plugged into an electrical outlet that is
correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a properly
grounded 3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this cooktop for
complete installation and grounding instructions.
Grounding
type wail Do not, under any
circumstances,
rece
cut, remove,
or bypass the
grounding prong.
Power supply
"ord with 3-prong
grounding plug
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard
and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong from
this plug.
Avoid fire hazard or electrical shock. DO
NOT use an adapter plug, an extension cord, or remove
grounding prong from electrical power cord. Failure to follow
this warning can cause serious injury, fire or death.