Product Record; Serial Plate Location; Grounding Instructions; Liquefied Petroleum (Propane) Gas Conversion - Kenmore 790.3102 Series Use & Care Manual

Table of Contents

Advertisement

Product Record
In this space below, record the date of purchase, model and
serial number of your product. You will find the model and
serial number printed on the serial plate. This serial plate is
located under the cooktop. See bottom
of this page for the
serial plate location.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future
reference.
Serial Plate Location
You will find the model and serial number )rinted on the
serial plate. The serial plate is located under the cooktop.
Please see the illustration for exact location. Remember
to record the serial number for future reference (See
Product Record above).
Serial plate is
located under
the burner box.
Grounding Instructions
For personal safety, the cooktop must be properly grounded.
For maximum safety, the power cord must be plugged into
an electrical outlet that is correctly polarized and properly
grounded.
DO NOT Operate the cooktop using a 2-prong adapter
or an extension cord. If a 2-prong wall receptacle is the
only available outlet, it is the personal responsibility of the
consumer to have it replaced with a properly grounded
3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION
INSTRUCTIONS
packaged with this
cooktop for complete installation and grounding instructions.
Grounding
type wall
receptacl_
Do not, under any
circumstances,
cut,
remove, or bypass
the grounding
prong.
supply cord with
3-prong grounding plug
This appliance is equipped with a 3-prong
grounding plug for your protection against shock hazard
and should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong from
this plug.
Avoid fire hazard or electrical shock.
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious injury,
fire or death.
Conversion
to Liquefied Petroleum Gas (or L.P. Gas)
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.R) Gas.
Only a qualified service agent should perform the L. R
conversion. Contact the local gas provider for conversion.
The L. R Conversion Kit is supplied with this range and
is located on the main back of the range. The kit contains
installation instructions which must be read before and
followed carefully when installing the kit.
Personal injury or death from electrical
shock may occur if the range is not installed by a qualified
installer or electrician.
To avoid serious injury, any additions,
changes or conversions required in order for this
appliance to satisfactorily meet the application needs
must be made by a qualified service agent.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.3050 series

Table of Contents