Panasonic VF0 Series 400V class Instruction Manual page 63

PASSWORD (Parameter P65)
A password can be set to prevent unintentional changes to the parameter data after it has
been set.
Data setting range
[Procedures for changing parameter data after setting password]
∗ Example when password is set to "777"
STOP
Press the STOP button to stop the inverter.
When the MODE button is pressed three times, the password input
MODE
display (PS) will appear, and the main display will flicker.
Press the
password. (The main display will flicker.)
The parameter No. will appear when the SET button is pressed.
SET
∗ After this step, the data is changed with the normal changing procedures.
Note) After the parameter is set, the "function setting mode" cannot be called without
inputting the password. (Write down the password so that you do not forget it.)
000 • 1 to 999
("000" indicates that there is no password.)
(up) and (down) buttons to display the previously set
F r d
Main display
0 0 0
P S
r
7 7 7
P 0 1
62