Panasonic VF0 Series 400V class Instruction Manual page 30

[Continued from previous page, Example to rotate in reverse at operating frequency 50Hz]
MODE
MODE
Changing
the
SET
rotation
direction
SET
Run
RUN
command
[Example to change to forward rotation during reverse rotation]
MODE
Changing
MODE
the
rotation
SET
direction
SET
[Stopping operation]
Stop
STOP
command
Operating with the operation panel - 4
· Forward/reverse run operation:
· Frequency setting: Digital setting (Parameter P09=1)
1. Carry out the same operation as "Operating with the operation panel - 2" for
forward run/reverse run, stopping.
2. Carry out the same operations as "Operating with the operation panel - 3"
to set and change the frequency.
Note 1) The rotation direction cannot be set with the "rotation direction setting
mode (dr)" in this Operating with the operation panel - 4. In the
"rotation direction setting mode (dr)", only the rotation direction and
local/external operation control state can be monitored.
Note 2) The MOP function cannot be used with this Operating with the
operation panel - 4.
29
Press the MODE button.
Press the MODE button.
Press the SET button. (The main display will flicker)
Press the (up) button. (The main display will flicker)
Press the SET button to set the data.
Press the RUN button.
As the frequency is already set to 50Hz, the motor will start
rotating in the reverse direction and will reach 50Hz in approx. 5
seconds.
Press the MODE button.
Press the MODE button.
Press the SET button. (The main display will flicker)
Press the (down) button. (The main display will flicker)
Press the SET button.
The motor will decelerate, and will start forward
rotation at 50Hz.
Press the STOP button.
The motor will start to decelerate and will stop in approx. 5
seconds.
Forward run/reverse run (Parameter P08=1)
Main display
F
d

L

L
0 0
5 0.
F
d

L

L
Reverse run
0.
5
0.
0.
Forward run 5
0 0
r
r
F
r
0
0
r
r
r
F
0
0
0
0