Mounting The Camera - Beward N6603 User Manual

Hide thumbs Also See for N6603:

Table of Contents

Step 3: secure the sunshield with the screws.

4.3.2. Mounting the Camera

The bracket is attached to the surface using 3 self-tapping screws (25x6) (Pic. 4.4).

Step 1: mark the location of the holes that you are going to drill to attach the bracket.

Step 2: drill three holes of 25 mm depth into the surface if you use the supplied screws.

Step 3: attach the bracket to the surface using the three self-tapping screws.

The bracket is attached to the camera by twisting it (using the screw connection in the top

part of the bracket) in the special holes located in the top and bottom parts of the base. Tilt the

camera to the desired position using the two adjustment handles (Pic. 4.5).

NOTE:

The bracket screw holes are compatible with the sunshield attachment holes. Therefore, you can use the

sunshield attachment holes to attach the bracket as well.

N6603 Installation User Manual

Chapter 4. Installing the Camera and Connecting a Cable

Pic. 4.4

Pic. 4.5

Table of Contents

N35110