Configuring The Camera S Network Settings Through The Web Interface - Beward N6603 User Manual

5.5. Configuring the Camera's Network Settings through the Web Interface
After connecting to the N6603, you need to change its network parameters to get it and
your other devices (e.g. your computer) to the same subnet.
IMPORTANT!
To make your camera and your computer work together, the first three parts of their IP addresses must be
the same but the fourth must be different.
For example, the IP address of your computer is 192.168.50.40. An IP address consists of four octets
separated by dots. In the provided example, the 1st octet is 192, the 2nd octet is 168, the 3rd octet is 50,
and the 4th octet is 40. You need to change the IP address of your camera so that the first three octets of
its IP address are the same as your computer's IP address. Therefore, the IP address of your camera
must be of the form 192.168.50.XX. You only need to change the fourth octet to a number different from
the IP address of your computer and other network devices.
N6603 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.28
35