Table of Contents
Advertisement
Step 4: turn on the virtual server. To do so, select the [Enable Virtual Server].
Step 5: create the network address translation rules (Pic. 6.8). Enter the camera IP address
and the HTTP port 80. Set the traffic type to "Both", which allows both UDP and TCP translation.
Enter a port number to access the camera over the Internet (for the provided example, the port is
8081). You can also make a comment (optional).
Step 6: click the [Add] button (this adds the created rule to the routing table). The rule is
added (Pic. 6.9).
Step 7: repeat to create a forwarding rule for RTSP (Pic. 6.10).
N6603 Installation User Manual
Chapter 6. Accessing the Camera over the Internet
Pic. 6.8
Pic. 6.9
52
Advertisement
Table of Contents
