Display Head - Thermador C302 Service Manual

The display head has a total of 8 pin headers (0nly 7 are used), they are
identified as P1, P2, P4, P6, P8, P10 and P11.
P1 pin header has 18 pins and connects to the large touch control
board (P1).
P2 pin header has 2 pins and connects to the meat probe.
P4 pin header has 2 pins and connects to the lower oven air switch.
P6 pin header has 2 pins and connects to the upper oven air
switch.
P8 pin header has 2 pins and connects to the large touch control
board (P1).
P10 pin header has 8 pins and connects to the relay board (yellow
harness to P10 on relay board).
P11 pin header has 9 pins and connects to the relay board ( orange
harness to P11 on relay board).

Display Head

Page 15