Intercom With Channels "A" And "B - scala rider G9x User Manual

3. If Flash-Pairing was successful, a purple light appears for
2 seconds.
You can also "Flash-Pair" intercom channels "A" and "B" by pressing
either channel button or
OPTION 3: Standard "One+8" Pairing
(with cardo SHO-1, G9 and G9x models)
1. In Standby, press for 5 seconds to enter pairing mode.
2. Repeat on the second unit.
3. If pairing was successful, a purple light appears for 2 seconds.
If your scala rider G9x already has a full list of 8 paired "One+8"
Intercom Buddies, pairing another buddy will replace the buddy
that you have not spoken to for the longest time.
5.1c PAIRED DEVICE INDICATION
You can see which units within a range of 20m are your "One+8"
Intercom Buddies.
In Standby, press
Paired Device
If "One+8" Buddies are within range, the LEDs on
Indication
both units will turn PURPLE for 2 seconds
before bumping the units together.
and for 2 seconds
5.1d CALLING "ONE+8" INTERCOM BUDDIES
There are two ways to start an intercom call with "One+8" buddies.
OPTION 1: Voice Connect (VOX)
Speak any word loudly into the microphone. When you hear the
Voice Command tone, say the name of a "One+8" Intercom Buddy
i.e. "John Smith"
☛
OPTION 2: Manual Mode
SAY THE NAME
Tap and say the name of
the "One+8" Buddy
If a "One+8" intercom buddy is not in range, or moves out of range,
you have the option to set up the "IC-to-Phone" feature via the
Cardo Community, to remain in contact by diverting Intercom calls
to your mobile phones.

5.2 INTERCOM WITH CHANNELS "A" AND "B"

Start multi-party conversations using Intercom Channels "A" and
"B". This mode is suitable for 2, 3 or 4-way calls.
CHOOSE THE NAME
(from your Buddy List):
Press for 2 seconds. Hear
the names of all pre-paired
"One+8" buddies.
When you hear the name of
the Buddy you wish to call,
tap or say any word loudly
into the microphone.
To cancel Buddy List playback:
Press for 2 seconds.
scala rider G9x / G9x PowerSet
®
|
9