Table of Contents
Advertisement
Scan and Save: Scan through FM stations
1. Press
for 5 seconds. The radio will search upwards (higher
frequency) for a station. When a station is found, it can be heard
for a few seconds.
2. To stop the scan on this station: Tap .
3. Tap
within 20 seconds of finding the FM station to save it as
the current Preset.
4. To continue scan: Wait for the next station to be found.
During Scan, tap
to fast save the current FM station as the
current Preset
7.2 AUTOMATIC RADIO TUNING
Find new stations fast and easy by automatically creating a list of
6 temporary radio stations.
1. With the radio on, press
for 5 seconds.
2. The radio will search upwards (higher frequency) from the
current station and store the next 6 FM stations it discovers.
3. If desired, repeat to store the next 6 FM stations.
These 6 temporary stations cannot be saved and do not replace the
FM Presets you may have saved.
Turning off your scala rider will clear the temporary stations and
restore the FM Presets.
8. TROUBLESHOOTING
If your scala rider stops responding, reset it by turning it
Reboot
off and then on again (press
1. In Standby, press
Reset Pairing
RED/BLUE.
(Deletes all
2. Press
for 2 seconds until LED flashes 5 times in
paired devices)
PURPLE.
9. SUPPORT
For additional information:
www.cardosystems.com
support@cardosystems.com
USA and Canada: 1-800-488-0363
International: +49 89 450 36819
IMPORTANT
MULTINATIONAL COMMERCE COMPANIES AND ONLINE AUCTION WEBSITES ARE NOT AUTHORIZED
TO SELL CARDO PRODUCTS AND PURCHASES FROM SUCH SITES ARE AT YOUR OWN RISK. TO RECEIVE
WARRANTY OR CUSTOMER SERVICE, YOU MUST SUBMIT ORIGINAL RECEIPTS FROM AUTHORIZED
CARDO DEALERS.
PRODUCTS THAT WERE IMPORTED FROM NORTH AMERICA MUST BE SERVICED IN THE USA.
for 2 seconds).
or
for 5 secs until LED flashes
scala rider
G9x / G9x PowerSet
®
|
15
Hide quick links:
Advertisement
Table of Contents
