Voice Connect (Vox); Intercom - scala rider G9x User Manual

4.6 VOICE CONNECT (VOX)

The scala rider G9x offers VOX technology for safe and hands-free
operation of some key functions.
In the you can set VOX to either start an intercom
Cardo Community
call or activate the Voice Command.
VOX Activation
Speak any word loudly into the microphone
Answer a call
Speak any word loudly into the microphone
Reject a call
Remain silent for about 15 seconds
Adjust via the Settings Menu or the Cardo
Community.
VOX Sensitivity
High: Use this setting if it is difficult to activate VOX
(Default: Medium)
Low: Use this setting if it is too easy to activate VOX
VOX can be set to activate the Voice Command
VOX Operation
(default) or to start an Intercom Call via the Cardo
Mode
Community
In Standby, press
Enable/Disable
2 seconds
VOX (For Intercom/
Voice Command
• Enable: Blue flash for 2 seconds
only)
• Disable: Red flash for 2 seconds
and simultaneously for

5. INTERCOM

The scala rider G9x allows full duplex intercom communication at a
range of up to 1.6 km (subject to terrain and within line of sight).
Open the antenna for maximum range
To chat with someone via Intercom, first pair your scala rider G9x to
the second unit. Pairing is a one-time process. Once paired, the units
should automatically recognize each other whenever in range.
If you have purchased the scala rider G9x PowerSet, the box contains
two factory-paired units configured to communicate via Channel "A".
Intercom Compatibility
Your scala rider G9x is compatible with all scala rider intercom
models. In addition, it is also compatible with the cardo SHO-1 and
Schubert's SRC-System™. Intercom range with other models is limited
to the distance of the device with the shorter range. For more info
please visit www.cardosystems.com/G9xcompatibility.
scala rider G9x / G9x PowerSet
®
|
7