Voice Command; Settings - scala rider G9x User Manual

4.4 VOICE COMMAND

The scala rider G9x allows you to perform certain actions by simply
using your voice. Using advanced Voice Recognition, you can
control the scala rider G9x completely handsfree.
The default Voice Command language is English. Other languages
can be selected via the Cardo Community platform (see section 3)
or via the Settings menu on the unit.
Throughout this manual, features which are available via Voice
Command are marked with the
1. With no call in progress, tap
activate VOX
2. Speak a Voice Command from the table below:
Current Mode Desired Action
"One+8" Intercom Call*
Standby / FM /
A2DP / AUX
Intercom call with A or B "Call Intercom"
Start A2DP
Standby
Turn on FM
Turn off FM
FM Radio
Next Station Preset
Previous Station Preset
Stop / Pause A2DP
A2DP Music
Next Track
Previous Track
*see Section 5.1 for details
|
scala rider G9x / G9x PowerSet
®
6
icon.
or speak any word loudly to
Say this:
<<Buddy Name>>*
"Music ON"
"Radio ON"
"Radio OFF"
"Next Station"
"Previous Station"
"Music OFF"
"Next Track"
"Previous Track"
Voice Command performance may vary based on environmental
conditions including driving speed, helmet type and ambient noise.
For improved performance of the Voice Command feature,
minimize wind impact on the microphone by using the large
microphone sponge and closing the visor.

4.5 SETTINGS

Customize various settings according to your preferences:
• Spoken Status Announcements, i.e. informing you about
connectivity status (default: ON)
• AGC sensitivity level for the speakers (default: Medium)
• VOX sensitivity level for the microphone (default: Medium)
• Click-to-Link Intercom (default: ON)
• A2DP audio / Intercom priority to change priority for A2DP
audio sources (via Cardo Community only)
To change settings:
• Via the Cardo Community platform at
http://community.cardosystems.com (see section 3).
• Via the Settings menu on your unit. The menu is available in
several languages.
In Standby, press
Enter Menu
Press for 2 seconds
Exit Menu
and for 2 seconds