Battery; Clutch Adjustment - Sym Wolf SB 250 Ni Service Manual

2. Maintenance Information

Battery

Battery removal
Remove the seat
Remove the〝─〞negative pole first, then remove
the〝＋〞positive pole.
Remove the battery holder and take out the
battery.
Caution
If the rust on the posts is very serious, spray

some hot water on them. Then, you can
remove the rust by steel brush more easily.
Apply some grease on the posts after

cleaning rust to prevent from happening
again.
If there is some rust on battery posts, clean it with
steel brush.
Install the battery in the reverse procedures of
removal.
Battery model : GT12A-BS

Clutch adjustment

Clutch lever free play inspection
Slightly pull the clutch lever to check the free play
before clutch disengagement.
Free play：10~20 mm
Clutch lever free play adjustment
Before adjusting the clutch lever free play, please
loosen the lock nut first. Then turn the adjusting
screw to achieve the recommended clutch free
play. If you want to decrease the free play of
clutch lever, turn it clockwise.
increase the free play, turn it counterclockwise.
After adjustment, tighten the adjusting nut with
lock nut.
Lubricate the clutch cable.
2-12
If you want to
Negative pole
10~20 mm
Adjusting nut
Positive pole
Lock nut