Sym Wolf SB 250 Ni Service Manual page 113

Engine installation
Install the engine in the reverse order of
removal.
Caution
When assembling, always pay attention

to possible injuries.
Wires, cables, tubes, and hoses cannot

be bent or pressed.
Please align the wires and cables in

accordance with the setting diagram.
Torque value:
Engine suspension nut (the upper part of
engine and frame)
Engine assembly nut (the front part of engine
and engine hanger)
Engine assembly nut (the back part of the
engine and frame)
L crankcase chain cover bolt
Driven sprocket bolt
After installation, fill in specified engine oil and
coolant, adjust clutch lever free play, drive
chain free slack, and idle speed.
2.4~3.0kgf-m
3.0~4.0kgf-m
4.5~5.5kgf-m
0.8~1.2kgf-m
0.8~1.2kgf-m
6. Engine Removal
6-7