Check Light Fault Codes Differentiation - Sym Wolf SB 250 Ni Service Manual

Check light fault codes differentiation

Check light flashing mode
When there is no diagnostic tool for fault detection, wire jump the test switch and identify the
f ault by check light flashing and then correct the fault.
1
1
1
Fault code 22
Fault Code manual elimination procedure:
Fault code can be eliminated manually without using diagnostic tool, procedures as following:
1.
Main switch OFF
2.
Wire jump the test switch.
3.
Full throttle and do not release.
4.
Main switch ON
5.
Continue step 3 and 4 for five seconds, five seconds later the check light will flash twice quickly. Then the fault
code will be eliminated.
6 .
Remove the jumping wire.
close
0.5
1 3
full
At least 5 seconds
OFF
1 0.5
1
Fault code 12
Wire-jump
ON
3. Fuel Injection System
6
Continuous repeated
No wire-jump
close
Check light flashes twice
Unit: second
OFF
3-41