Air Conditioner Features - Kenmore 580.75050 Owner's Manual

AIR CONDITIONER FEATURES
The controls featured in this manual are
representative of the many models available. Your
model may look slightly different.
AIR DIRECTION ADJUSTMENT
Using the Control Tabs, the air flow can be directed
to the left, right, straight ahead, or any combination
of these directions.
/r_p_©we_ ,
Coo
FIG. 13
FIG. 14
Power
Turns air conditioner on and off.
NOTE: If the air conditioner is off and is then turned on while set in the Cool On mode, it wil take
aproximately 3 minutes for the compressor to start and cooling to begin.
Fan Speed
Use to set the fan speed to LOW or HI.
Mode/Temp Control
Use to set the air conditioner to the Fan Only or the Cool On mode.
Fan Only Mode
Use Fan Only at HI or LOW Fan Speed to provide air circulation and filtering without cooling.
Cool On Mode
The mode/Temp control is used to maintain the room temperature. When set in the Cool On mode, the
compressor will cycle on and off to keep the room at the desired level of comfort.
Use Cool On with HI or LOW Fan Speed for cooling. Turn the knob toward the cooler area for the indoor air
to become cooler. Turn the knob toward the Cool On area for the indoor air to become warmer.
Cooling Descriptions
For Normal Cooling - Select the Cool On mode with the Mode/Temp knob set at the midpoint(5).
For Maximum Cooling - Select the Cool On Mode with the Mode/Temp knob set toward the cooler area(9).
For Quieter & Nighttime Cooling - Select the Cool On mode with the ModeiTemp knob set toward the Cool
On. area(1 ).
NOTE: If you move the mode/Temp control knob from the Cool On setting to the Fan Only setting, wait least
3 minutes before switching back to a Cool On setting.
-10-