Discrete 2 Of; Enable/Disable Discrete 2 Of; Set Lengths For Discrete 2 Of - Philips Pocket Memo DPM8500 Configuration Manual

Discrete 2 of 5

Enable/Disable Discrete 2 of 5

Discrete 2 of 5
Enable/Disable Discrete 2 of 5
Parameter # 05h
9 Discrete 2 of 5
Enable/Disable Discrete 2 of 5
Parameter # 05h
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Parameter # 05h
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Enable/Disable Discrete 2 of 5
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Parameter # 05h
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.

Set Lengths for Discrete 2 of 5

Set Lengths for Discrete 2 of 5
Parameter # L1 = 14h L2 = 15h
Set Lengths for Discrete 2 of 5
Set Lengths for Discrete 2 of 5 Parameter # L1 = 14h L2 = 15h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. To
Parameter # L1 = 14h L2 = 15h
Parameter # L1 = 14h L2 = 15h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
set lengths via serial commands, see
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for D 2
contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. To
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code
of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example, select D
set lengths via serial commands, see
contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range. To
2 of 5 One Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters. Numeric bar
set lengths via serial commands, see One Discrete Length - Select this option to decode only those codes containing a selected length. For example, select D 2 of 5 One Discrete Length,
One Discrete Length - Select this option to decode only those codes containing a selected length. For example, select D
codes begin on page 4-73. To change the selection or cancel an incorrect entry, scan
2 of 5 One Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters. Numeric bar then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters. Numeric bar codes begin on page 56. To change the selection or cancel
One Discrete Length - Select this option to decode only those codes containing a selected length. For example, select D
codes begin on page 4-73. To change the selection or cancel an incorrect entry, scan
an incorrect entry, scan Cancel on page 57.
2 of 5 One Discrete Length, then scan 1, 4, to decode only D 2 of 5 symbols containing 14 characters. Numeric bar
codes begin on page 4-73. To change the selection or cancel an incorrect entry, scan
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example,
select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example,
characters. Numeric bar codes begin on
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select D 2 of 5 Two Discrete
select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14
page 4-74.
Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14 characters. Numeric bar codes begin on page 56. To change the
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example,
characters. Numeric bar codes begin on
selection or cancel an incorrect entry, scan Cancel on page 57.
select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only D 2 of 5 symbols containing 2 or 14
page 4-74.
4 - 52 SE655 Decoded Linear Imaging Engine
characters. Numeric bar codes begin on
page 4-74.
Set Lengths for Discrete 2 of 5 (continued)
Length Within Range - Select this option to decode codes within a specified range. For example, to decode D 2 of 5
Length Within Range - Select this option to decode codes within a specified range. For example, to decode D 2 of 5 symbols containing between 4
symbols containing between 4 and 12 characters, first scan D 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single
and 12 characters, first scan D 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric
digit numbers must be preceded by a leading zero). Numeric bar codes begin on
cancel an incorrect entry, scan
bar codes begin on page 56. To change the selection or cancel an incorrect entry, scan Cancel on page 57.
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters.
Any Length - Scan this option to decode D 2 of 5 symbols containing any number of characters.
Selecting this option may lead to misdecodes for D 2 of 5 codes.
NOTE
42
Enable Discrete 2 of 5
Enable Discrete 2 of 5
Enable Discrete 2 of 5
*Disable Discrete 2 of 5
*Disable Discrete 2 of 5
*Disable Discrete 2 of 5
Setting Code Lengths Via Serial Commands on page
Setting Code Lengths Via Serial Commands on page
Setting Code Lengths Via Serial Commands on page
D 2 of 5 - One Discrete Length
D 2 of 5 - One Discrete Length
D 2 of 5 - One Discrete Length
page 4-73. To change the selection or cancel an incorrect entry, scan
4-73. To change the selection or cancel an incorrect entry, scan
page
page 4-73. To change the selection or cancel an incorrect entry, scan
D 2 of 5 - Two Discrete Lengths
D 2 of 5 - Two Discrete Lengths
D 2 of 5 - Two Discrete Lengths
Cancel on page 4-74.
D 2 of 5 - Length Within Range
(01h)
(01h)
(01h)
(00h)
(00h)
(00h)
page
A-7.
A-7.
A-7.
Cancel on page 4-74.
Cancel on page 4-74.
Cancel on page 4-74.
4-73. To change the selection or
Barcode scanner configuration guide
Cancel on
Cancel on
Cancel on