Convert I 2 Of 5 To Ean-13 - Philips Pocket Memo DPM8500 Configuration Manual

Transmit I 2 of 5 Check Digit
Transmit I 2 of 5 Check Digit
Parameter # 2Ch
Transmit I 2 of 5 Check Digit
Parameter # 2Ch
Scan this symbol to transmit the check digit with the data.
Parameter # 2Ch
Scan this symbol to transmit the check digit with the data. Scan this symbol to transmit the check digit with the data.
Scan this symbol to transmit data without the check digit.
Scan this symbol to transmit data without the check digit.
Scan this symbol to transmit data without the check digit.
4 - 50 SE655 Decoded Linear Imaging Engine

Convert I 2 of 5 to EAN-13

Parameter # 52h
Convert I 2 of 5 to EAN-13
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this,
I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check
Parameter # 52h
digit.
This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this, I 2 of 5 must be enabled,
one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit.
Barcode scanner configuration guide
Transmit I 2 of 5 Check Digit (Enable)
(01h)
Transmit I 2 of 5 Check Digit (Enable)
(01h)
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(00h)
*Do Not Transmit I 2 of 5 Check Digit (Disable)
(00h)
Convert I 2 of 5 to EAN-13 (Enable)
(01h)
*Do Not Convert I 2 of 5 to EAN-13 (Disable)
(00h)
41