Upc/Ean/Jan Supplemental Aim Id Format; Transmit Upc-A Check Digit; Transmit Upc-E Check Digit - Philips Pocket Memo DPM8500 Configuration Manual

Parameter # F1h A0h
Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with
page 4-67 set to
AIM Code ID Character

UPC/EAN/JAN Supplemental AIM ID Format

•
- transmit UPC/EAN with supplementals with separate AIM IDs but one transmission, i.e.:
Separate
Parameter # F1h A0h
Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID Character set to AIM Code ID ]E<0 or 4><data>]E<1 or 2>[supplemental data]
Character:
•
– transmit UPC/EAN with supplementals with one AIM ID and one transmission, i.e.:
Combined
• Separate - transmit UPC/EAN with supplementals with separate AIM IDs but one transmission, i.e.:
]E3<data+supplemental data>
]E<0 or 4><data>]E<1 or 2>[supplemental data]
•
• Combined – transmit UPC/EAN with supplementals with one AIM ID and one transmission, i.e.:
Separate Transmissions
i.e.:
]E3<data+supplemental data>
• Separate Transmissions - transmit UPC/EAN with supplementals with separate AIM IDs and separate transmissions, i.e.:
]E<0 or 4><data>
]E<1 or 2>[supplemental data]
]E<0 or 4><data>
]E<1 or 2>[supplemental data]

Transmit UPC-A Check Digit

Parameter # 28h
Transmit UPC-A Check Digit
Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit.
Parameter # 28h
Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit.

Transmit UPC-E Check Digit

14
Parameter # 29h
:
- transmit UPC/EAN with supplementals with separate AIM IDs and separate transmissions,
Separate Transmissions
*Transmit UPC-A Check Digit
Do Not Transmit UPC-A Check Digit
Separate
(00h)
*
Combined
(01h)
NEW END
(01h)
(00h)
Transmit Code ID Character on
Parameter Menus 4 - 21
Barcode scanner configuration guide