Grandstream Networks HandyTone-488 User Manual page 5

HandyTone-488 User Manual
HandyTone-488 has one FXS port and one FXO port. The PHONE port next to the LAN port is a
FXS port. The LINE port on the side of the HandyTone-488 is a FXO port. Both the FXS port and the
FXO port can have a separate SIP account. This is a key feature of HandyTone-488. Telephone calls
can be originated from or terminated to the PSTN network via FXO port.
Following are the steps to install a HandyTone-488:
1. Connect a standard touch-tone analog telephone to the PHONE port.
2. Insert a standard RJ11 telephone cable into the LINE port and connect the other end of the
telephone cable to a wall jack.
3. Insert the Ethernet cable into the WAN port of HandyTone-488 and connect the other end of
the Ethernet cable to an uplink port (a router or a modem, etc.)
4. Connect a PC to the LAN port of HandyTone-488.
5. Insert the power adapter into the HandyTone-488 and connect it to a wall outlet.
Please follow the instructions in section 6.2.1 to configure the HandyTone-488.
5
Grandstream Networks, Inc.