Grandstream Networks HandyTone-488 User Manual page 23

HandyTone-488 User Manual
Offhook Auto-Dial:
Send Flash Event:
FXS Impedance:
Caller ID Scheme:
Onhook Voltage:
Disable Call-
Waiting:
Polarity Reversal:
NTP Server:
Send Anonymous:
Lock keypad update:
WAN side http
access:
Admin Password
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Register Expiration This parameter allows the user to specify the time frequency (in minutes) the
Yes, send periodical SUBSCRIBE for Message Waiting Indication
No Yes (Flash will be sent as a DTMF event if set to Yes)
current setting is " 600 Ohm (North America)"
current setting is " Bellcore"
current setting is " 48V"
No Yes
No Yes (reverse polarity upon call establishment and termination)
time.nist.gov
No Yes (caller ID will be blocked if set to Yes)
No Yes (configuration update via keypad is disabled if set to Yes)
No Yes (WAN side access to http server will be rejected if set to No)
Cancel Update
All Rights Reserved Grandstream Networks, Inc. 2004
This contains the password to access the Advanced Web Configuration page.
This field is case sensitive.
SIP Server's URI or IP address
SIP Outbound Proxy Server's URI or IP address
SIP service subscriber's User ID
SIP service subscriber's Authenticate ID. Can be identical to or different from
SIP User ID
SIP service subscriber's account password
SIP service subscriber's name which will be used for Caller ID display
HandyTone ATA refreshes its registration with the specified registrar. The
default interval is 60 minutes (or 1 hour). The maximum interval is 65535
minutes (about 45 days).
(User ID/extension to dial automatically when offhook)
(URI or IP address)
Reboot
23
Grandstream Networks, Inc.