Grandstream Networks HandyTone-488 User Manual page 19

Analog telephone adaptor for sw release version 1.0.2.6
Hide thumbs Also See for HandyTone-488:
Table of Contents

Advertisement

HandyTone-488 User Manual
Forward to PSTN
Forward to VoIP
In addition to the Basic Settings configuration page, end users also have access to the device Status
page. The following is a snap shot of the device Status page. Details will be explained next.
MAC Address: 00.0B.82.02.B2.95
WAN IP Address: 192.168.1.12
Product Model: HT488
Software Version: Program-- 1.0.2.6 Bootloader-- 1.0.1.0 HTML-- 1.0.0.6 VOC-- 1.0.0.10
System Up Time: 2 day(s) 3 hour(s) 23 minute(s)
Registered: Yes
PPPoE Link Up: disabled
detected NAT type is full cone
MAC Address
WAN IP Address
Product Model
Software Version
System Up Time
Registered
Calls are unconditionally forwarded to the specified PSTN phone number
once users dial the FXO port VoIP number.
Calls are unconditionally forwarded to the specified VoIP phone number
once users dial the FXO port PSTN number.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
All Rights Reserved Grandstream Networks, Inc. 2004
The device ID, in HEX format. This is a very important ID for ISP
troubleshooting.
This field shows WAN port IP address.
This field contains the product model info.
Program: This is the main software release, its number is always used for
firmware upgrade.
Bootloader: This is normally not changed.
HTML: This is the web user interface, normally not changed.
VOC: This is the codec program, normally not changed.
This field indicates how long the device has been up since the last reboot.
This field indicates whether the device is registered to the SIP server.
19
Grandstream Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents